24

2010

-

06

Wear-resistant steel balls—what are the classifications of steel balls for ball mills?

Author:


Wear-resistant steel balls, as an indispensable component (grinding media) of ball mills, are undoubtedly the largest consumable wear-resistant material in the global comminution industry—both today and for the foreseeable future. In 2008, the mineral processing sector alone in China consumed approximately 2 million tonnes of steel balls made from various materials, while the Chinese cement industry is projected to consume a record-breaking 200,000 tonnes in 2009.

Wear-resistant steel balls, as an indispensable component (grinding media) of ball mills, are undoubtedly the largest consumable wear-resistant material in the global comminution industry—both today and for the foreseeable future. In 2008, the mineral processing sector alone in China consumed approximately 2 million tonnes of steel balls made from various materials, while the Chinese cement industry is projected to consume a record-breaking 200,000 tonnes in 2009.

Wear-resistant steel balls on the market today are generally categorized into two types: cast and forged—but their wear resistance differs. So which type of wear-resistant steel ball is the most durable on the market today?

Wear-resistant steel balls are classified into two main categories: cast steel balls and forged steel balls.

1. Cast steel balls (cast grinding balls) are produced by steel ball manufacturers who heat scrap steel, scrap iron, and other waste furnace charges in a medium-frequency induction furnace to bring them to full molten state. During the melting process, appropriate amounts of precious metal alloys—such as ferrochrome, ferromanganese, and ferrovanadium—are added to the melt to adjust its chemical composition. Once the molten iron reaches a temperature of 1,550°C or higher and meets the specified process requirements, the qualified molten iron is poured into steel ball molds or molds used in the steel ball production line. Steel balls manufactured through this casting and smelting process are referred to as cast steel balls (cast grinding balls).

Cast steel balls are classified by material into high-chromium alloy cast balls, multi-element alloy cast balls, and low-chromium alloy cast balls.

II. Forged steel balls are manufactured by steel ball producers through direct high-temperature heating followed by forging; they do not require smelting and casting, but are simply forged, hence the name “forged steel balls.”

Forged steel balls contain chromium in the range of 0.1% to 0.5% (though forged grinding balls generally do not contain chromium), with a carbon content of less than 1.0%. These balls are manufactured by high-temperature forging. Although the surface hardness (HRC) of some forged steel balls can reach or exceed 56, the hardening depth is only about 15 mm. Due to the poor hardenability of the forged steel ball material, the core hardness is typically only in the mid-30s HRC; moreover, as the diameter of the ball increases, its hardenability decreases further. Under normal conditions, water quenching is commonly used for forged steel balls.

3. Wear Resistance Comparison: The higher the hardness, the better the wear resistance.

High-chromium alloy cast balls subjected to heat treatment (oil quenching followed by tempering) with a hardness of HRC ≥ 60 exhibit wear resistance more than 2.5 times that of forged steel balls.