03

2010

-

11

Assessing the wear resistance of wear-resistant steel balls

Author:


Wear-resistant steel balls refer to steel balls that exhibit excellent wear resistance during operation in ball mills. Forged steel balls, drop-forged steel balls, rolled steel balls, and bearing steel balls are all classified as wear-resistant steel balls.

Wear-resistant steel balls refer to steel balls that exhibit excellent wear resistance during operation in ball mills. Forged steel balls, drop-forged steel balls, rolled steel balls, and bearing steel balls are all classified as wear-resistant steel balls.

There are two key indicators for assessing the wear resistance of steel balls: steel ball hardness (HRC) and steel ball breakage rate (%).

1. The hardness (HRC) of wear-resistant steel balls is determined using a Rockwell hardness tester (model: HR-150A). After oil quenching heat treatment, the hardness (HRC) of these balls is at least 58; in contrast, ordinary wear-resistant steel balls that have not undergone oil quenching exhibit a hardness (HRC) in the range of 45 to 54.

2. The breakage rate of wear-resistant steel balls is determined using a drop-ball tester and an impact testing machine. To obtain an accurate measurement of the ball breakage rate, it is best to base the assessment on the user’s actual operating conditions; after the ball mill has been emptied, weighing the remaining balls provides a more precise method.

Based on the operational experience of cement and mining customers both domestically and internationally, when the hardness of steel balls (HRC) is required to be ≥58 and the breakage rate during service is below 0.5%, such steel balls can be deemed to exhibit high wear resistance (low wear). In this sense, they truly qualify as wear-resistant steel balls with superior wear performance. It is also common practice to refer to steel balls with a hardness (HRC) below 56 as “wear-resistant steel balls”; however, due to their lower hardness, these balls generally have poorer wear resistance and higher wear rates.