17

2011

-

09

Introduction to Heat Treatment of Wear-Resistant Steel Balls

Author:


What is heat treatment? Heat treatment is a comprehensive manufacturing process in which materials are heated, held at a specific temperature, and then cooled in a controlled medium, thereby altering the microstructure of the material’s surface or interior to control its mechanical properties. Heat-treatment equipment includes benchtop tempering furnaces, fully automated pusher-type heat-treatment production lines, and pit-type tempering furnaces.

Heat treatment equipment

What is heat treatment? Heat treatment is a comprehensive manufacturing process in which materials are heated, held at a specific temperature, and then cooled in a controlled medium, thereby altering the microstructure of the material’s surface or interior to tailor its mechanical properties. Heat-treatment equipment includes benchtop tempering furnaces, fully automated pusher-type heat-treatment production lines, and pit-type tempering furnaces.

Heat treatment is classified into four types: annealing, normalizing, tempering, and quenching.

1. Annealing involves heating the workpiece to an appropriate temperature, holding it at that temperature for a duration that varies depending on the material and the size of the workpiece, and then cooling it slowly. The purpose is to bring the internal microstructure of the metal to an equilibrium state or close to it, thereby achieving desirable processing and service properties, or to prepare the microstructure for subsequent quenching.

2. Normalizing involves heating the workpiece to an appropriate temperature and then cooling it in still air. The effect of normalizing is similar to that of annealing, except that the resulting microstructure is finer. It is commonly used to improve the machinability of materials and, in some cases, serves as the final heat treatment for parts with relatively low performance requirements.

3. Tempering is a heat treatment process in which quenched workpieces are reheated to an appropriate temperature below the lower critical temperature, held at that temperature for a specified period, and then cooled in air or in a medium such as water or oil. After quenching, steel workpieces exhibit the following characteristics: (1) they contain non-equilibrium (i.e., unstable) microstructures such as martensite, bainite, and residual austenite; (2) they have significant internal stresses; and (3) their mechanical properties do not meet the required specifications. Therefore, steel workpieces generally undergo tempering after quenching.

The purposes of tempering are: ① to enhance microstructural stability, preventing further microstructural transformations during service and thereby maintaining dimensional stability and consistent mechanical properties; ② to relieve residual stresses, improving service performance and stabilizing dimensions; and ③ to tailor the mechanical properties of steel to meet specific application requirements.

The purpose of tempering is to reduce or eliminate the internal stresses induced during quenching, decrease the brittleness of quenched steel, and impart superior combined mechanical properties, including strength, toughness, ductility, and elasticity.

The reasons for these effects of tempering lie in the fact that, as temperature rises, atomic mobility increases, enabling atoms of iron, carbon, and other alloying elements in steel to diffuse more rapidly and undergo rearrangement and recombination. This gradual transformation converts an unstable, non-equilibrium microstructure into a stable, equilibrium one. The relief of internal stresses is also associated with the reduction in metal strength at elevated temperatures. During typical steel tempering, hardness and strength decrease while ductility increases; the higher the tempering temperature, the more pronounced these changes in mechanical properties become. In certain alloy steels with high alloy-element content, tempering within a specific temperature range can lead to the precipitation of fine metallic compounds, thereby increasing strength and hardness. This phenomenon is known as secondary hardening.

Depending on the tempering temperature, tempering is classified into low-temperature tempering, medium-temperature tempering, and high-temperature tempering.

1. Low-temperature tempering is carried out at a temperature of 150–250°C. This process partially relieves the internal stresses induced by quenching, reduces the brittleness of the steel, and enhances its toughness while maintaining high hardness. Consequently, it is widely used for components that require high hardness and excellent wear resistance, such as measuring tools, cutting tools, cold-working dies, and surface-hardened parts.

2. Medium-temperature tempering is carried out at a temperature of 300–450°C. This process effectively relieves most internal stresses, resulting in a significant reduction in hardness while still retaining considerable toughness and elasticity. Medium-temperature tempering is primarily used for components such as various types of springs, high-strength shafts and bushings, and hot-forging dies.

3. High-temperature tempering is carried out at a temperature of 500–650°C. This process effectively relieves internal stresses, resulting in workpieces that exhibit both excellent ductility and toughness as well as high strength. The heat treatment process involving quenching followed by high-temperature tempering is known as quenching and tempering. Most critical components that require superior overall mechanical properties undergo this treatment, such as shafts and gears.

4. Quenching: A heat-treatment process in which a metal workpiece is heated to a specified temperature and held at that temperature for a certain period, followed by rapid cooling through immersion in a quenching medium. Common quenching media include brine, water, mineral oil, and air. Quenching can enhance the hardness and wear resistance of metal workpieces; when combined with tempering at various temperatures, it can significantly improve the strength, toughness, and fatigue resistance of the metal while achieving an optimal balance among these properties (i.e., overall mechanical performance) to meet different service requirements. In addition, quenching can impart specific physicochemical properties to certain special steels—for example, it enhances the ferromagnetic properties of permanent-magnet steels and improves the corrosion resistance of stainless steels. Quenching is primarily applied to steel components. For most commonly used steels, upon heating above the critical temperature, the microstructure present at room temperature is entirely or largely transformed into austenite. Subsequently, the steel is rapidly cooled by immersion in water or oil, causing the austenite to transform into martensite. Compared with other microstructures in steel, martensite exhibits the highest hardness. The purpose of quenching is precisely to convert the microstructure of the steel—either wholly or substantially—into martensite, thereby attaining high hardness, followed by tempering at an appropriate temperature to achieve the desired properties of the workpiece. The rapid cooling during quenching induces internal stresses within the workpiece; when these stresses exceed a certain threshold, the workpiece may warp, deform, or even crack. Therefore, it is essential to select an appropriate quenching method. Based on the cooling method, quenching processes are classified into four types: single-liquid quenching, dual-medium quenching, step quenching for martensite, and isothermal quenching for bainite.

Annealing, normalizing, quenching, and tempering constitute the “four heat treatments” in overall heat treatment. Among these, quenching and tempering are closely related and are often used in combination; neither can be omitted. Depending on the heating temperature and cooling method, the “four heat treatments” give rise to various heat-treatment processes. To achieve a specified level of strength and toughness, the process that combines quenching with high-temperature tempering is called quenching and tempering. In some alloys, after quenching to form a supersaturated solid solution, the material is held at room temperature or at a slightly higher, appropriate temperature for an extended period to enhance its hardness, strength, electrical properties, magnetic properties, and other characteristics. This type of heat treatment is known as aging treatment.